Design a site like this with
Get started

How Fast Can You people go with roller skates

Roller skates are not just for kids anymore. They have become popular again as a way to have fun and get some exercise without having to go on a bike or run around the track. If you want to know how fast you can go on roller skates Australia, then you’ll need to know that there are actually two types of roller skates: inline and quad. Inline is the type that mostly everyone has seen before, with one wheel in front and two wheels in back.

Quad is similar, except it has four wheels instead of three; this allows for better balance when going at high speeds (and also makes them less likely to fall over when turning corners).

roller skates

The Biggest Factor That Determines Speed Is You

The biggest factor that determines your speed is you. You need to be fit, comfortable with the equipment and have a good understanding of how to skate. You should also have good balance and be able to control your speed effectively. Once all of these factors are satisfied, then you will be able to go as fast as you want on Impala roller skates.

Skate Configurations Matter

Skate configuration is important. It’s the number of wheels you have, and it affects how fast your skates will go. The more wheels, the faster you can go!

So how do you figure out the right skate configuration for your needs? Well, it depends on what kind of skating you want to do. For example, if you want to be able to speed around a track or race against other people on inline skates (also known as “quad skates”), then four-wheel skates are best for this purpose.

On the other hand, if there are no tracks available and all that matters is getting from point A to point B quickly and safely—whether around town or down stairs—then three-wheeled roller blades might be better suited for your needs.

Skate Wheels Affect Speed

  • The size, shape and hardness of the wheels on your roller skates Australia affect how fast you can go.
  • If you want to go fast, look for a pair of wheels that are large in diameter (over 60mm) and ideally made from polyurethane.
  • You should also consider how hard the wheels are: softer ones will allow for more sliding but won’t last as long; harder ones are more durable but won’t slide as well.
  • Most commonly available skate sizes range from 65-90mm in diameter, with smaller sizes being better for speed and larger ones being better for tricks.

Bearings Are Important

While the wheels are what you’re actually rolling on, bearings are the most important part of your roller skates Australia. They determine how fast you can go and how smoothly your skate moves. If they aren’t properly lubricated, they’ll rattle and make a lot of noise; if they’re too tight or too loose, it’ll be hard to move.

If you have bearings that are too loose, there’s a chance that they will fall out and leave you skating with no support at all!

So beware of bad bearings: don’t buy them if possible (you can always ask for help from someone who knows more than you do), but if nothing else works then try these tips:

  • Make sure all hardware is tight before skating – especially nuts and bolts holding wheels together
  • Inspect for cracks in frames before using them again
  • Wear protective gear such as helmets/knee pads or wrist guards during sporting activities such as inline skating because accidents happen even when following safety instructions carefully


While you can’t go too fast on roller skates, there are a lot of factors that affect how fast you can go. Once you know what makes a difference in your speed and how to increase it, then all that’s left is to get out there and skate!


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: